Home / Shop / Unis Ginex Small Rifle Primers Box of 1000

Unis Ginex Small Rifle Primers Box of 1000

SKU: UG453P3
38 reviews | Write a review

$79.00

Sold in Case packs of 5000 Only.

Out of stock

SKU: UG453P3 Categories: , , , Tag:
Description

Unis Ginex Small Rifle Primer (1000)

Get fast, dependable ignition with Unis Ginex Small Rifle Primers from Powder Valley. Shop 1000-ct boxes of Unis Ginex Small Rifle Primers for standard loads. These are sold as case quantity minimums (5000)

WARNING: This product can expose you to Lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to – www.P65Warnings.ca.gov.

Additional information
Weight 0.93 lbs
Dimensions 1 × 1 × 1 in
Brand

Type

Rifle

Quantity

Hazmat Class

UN0044

Pack Config

Box

Review & Questions Summary
4.71 of 5
Reviewed by 38 People
  1. Craig D (verified owner)

    While priced right, the cups on the small rifle primers I received are a little on the soft side. I had some deform while seating. In addition, I loaded the same load in .223 Ackley Improved cases with these and Remington 7 1/2 primers. The remington primers had rounded shoulders, the Unis Ginex Small rifle primers severely flattened. They do seem to be slightly larger in diameter as well, compared to RP/Federal SR primers.

    Craig D (verified owner)

  2. Roger Boyce (verified owner)

    Roger Boyce (verified owner)

  3. BILL FEIERABEND (verified owner)

    just tested them, seemed to work just fine, they were just a little tighter in the pocket. pressure signs were consistent with the cci’s i use

    BILL FEIERABEND (verified owner)

  4. GEORGE (verified owner)

    Great price!

    GEORGE (verified owner)

  5. Raymond (verified owner)

    Raymond (verified owner)

  6. Anonymous (verified owner)

    Anonymous (verified owner)

  7. GUS THEMARAS (verified owner)

    Had difficulty seating properly with previously crimped brass. I used the RCBS trim mate and my Dillon 1050 built-in swager to remove the crimp before seating and this is the only primer that I have had issues with. Switched over to CCI #41 and had no issues. Either swage the heck out of your brass or stay away from seating these in crimped brass like LC brass. Had no issues setting them off with a 3.5lb trigger.

    GUS THEMARAS (verified owner)

  8. Phil s

    The primers worked well… But there is one flaw with the ginex that no one else has mentioned yet. The primer walls must be stiffer than other brands I used before (CCI, s&b, wolf even), because they VERY difficult to prime on certain 556 brass – LC and Federal and Aguila in particular. Many require extra force to prime, and usually that will deform the brass bottom unfortunately. I have already removed any crimps on the brass, but it appears that is not enough. You need a reamer, so be prepared to spend lots of time reaming brass if you use mostly range pickup brass. It’s annoying and even though the price is cheaper than others, I would have opted to spend more money on other brands. I never had this problem with other brands, even military CCI.

    Phil s

Reviews
Write a review

Your email address will not be published. Required fields are marked *